Chain · RK

What Does Heavy Duty (HD) Chain Mean?

Velomoto teknik ekibiUpdated: 3 min read

Illustrative comparison of a standard and a heavy duty (HD) chain

Short answer

A heavy duty (HD) chain is a standard non-sealed chain reinforced with tougher materials and processes. RK's HD chains use heat-treated, shot-peened alloy steel and cold-forged seamless bushings; the chain is pre-stretched at the factory so it stretches less over its life.

HD chain is generally suited to small and mid-displacement motorcycles that come from the factory with a non-sealed chain, and to courier and load-carrying use. Because it has no seals, it does not last as long as O-ring or XW-ring chains and needs more frequent lubrication.

Velomoto is the official distributor of RK Japan in Turkey.

What sets an HD chain apart from a standard one?

  • Heat-treated steel: The plates and pins are hardened by heat treatment.
  • Shot peening: Shot is blasted onto the surface to increase fatigue strength.
  • Seamless bushings: Cold-forged seamless bushings resist wear better.
  • Pre-stretching: The chain is pre-stretched at the factory; initial stretch in use is reduced.

Standard, HD and O-ring chain comparison

PropertyStandard (STD)Heavy duty (HD)Sealed (O-ring / XW-ring)
SealNoneNoneYes
StrengthBasicHigher than standardHigh, depending on series
Wear lifeShortestLonger than standardLongest
Lubrication needFrequentFrequentLess frequent
PriceLowestMediumHigher
Typical useSmall displacement, low loadSmall to mid displacement, courier, loadMid to large displacement, long distance

Tensile strength example

According to data from a European spare parts retailer, RK's 520 heavy duty chain (520H) has a tensile strength of 34.3 kN (about 3,500 kg of force). The same source gives 37 kN for the O-ring 520XSO chain in the same size. For what tensile strength means, see our guide What is chain tensile strength?

Who is HD chain for?

  • 100–250 cc motorcycles and courier motorcycles that come from the factory with a non-sealed chain.
  • Loaded and stop-and-go use where a standard chain stretches quickly.
  • Motorcycles with narrow guards where an O-ring chain does not fit.

On large-displacement, high-power motorcycles, an O-ring or XW-ring chain is preferred.

RK's heavy duty series

RK's HD series is described as a heavy duty road chain for small-displacement motorcycles that come from the factory with a non-sealed chain. In the codes, the “H” after the size (e.g. 520H) indicates a heavy duty chain. Choose the right code for your motorcycle from the RK catalog.

RK logo

Products in this guide

RK chains and sprockets

Chains and heat-treated sprockets made in Japan since 1953; original equipment supplier to many manufacturers including Honda, Yamaha, Suzuki and Kawasaki. 1,119 products and 3,786 model applications in the catalog.

We do not sell directly to end users; you can find the products at our authorised dealers. See our dealers

Frequently asked questions

What does HD chain mean?

Heavy Duty chain; a reinforced version of the standard non-sealed chain.

Does an HD chain or an O-ring chain last longer?

Usually the O-ring or XW-ring chain. The seal keeps the lubricant inside and reduces wear.

Does an HD chain need lubrication?

Yes; since it is non-sealed, it should be lubricated more often than an O-ring chain.

Which chain for a courier motorcycle?

On a small-displacement motorcycle that comes from the factory with a non-sealed chain, an HD chain is a good choice; if the guard allows, an O-ring chain lasts even longer.

What does the H in an RK chain code mean?

The H after the size indicates a heavy duty chain (e.g. 520H).

Is HD chain used on large motorcycles?

On large, powerful motorcycles, use the O-ring chain recommended by the manufacturer.