Short answer
In a motorcycle chain size, the first digit gives the chain pitch and the last two digits give its inner width. Pitch is read in eighths of an inch: 4 = 4/8″ (12.7 mm), 5 = 5/8″ (15.9 mm). The last two digits give the width: 20 = 1/4″ (about 6.4 mm), 25 and 28 = 5/16″ (about 7.9 mm), 30 = 3/8″ (about 9.5 mm).
So 520, 525 and 530 have the same pitch but different widths; 428 is a chain with a smaller pitch. The chain, front sprocket and rear sprocket must all be the same size; find the correct size in the service manual or the RK catalog.
Velomoto is the official distributor of RK Japan in Turkey.
How do you read a chain code?
- First digit – pitch: The distance between two pin centers, written in eighths of an inch. 4 = 4/8″, 5 = 5/8″.
- Last two digits – inner width: The distance between the inner plates. 20 = 1/4″, 25 = 5/16″, 30 = 3/8″.
- 428 is an exception: “28” is not a fraction; the inner width of a 428 chain is taken as 5/16″ (about 7.9 mm).
Size table
| Code | Pitch | Inner width | Typical use |
|---|---|---|---|
| 420 | 1/2″ (12.7 mm) | 1/4″ (6.4 mm) | Mini motocross, small-displacement motorcycles |
| 428 | 1/2″ (12.7 mm) | 5/16″ (7.9 mm) | 100–250 cc road and off-road motorcycles |
| 520 | 5/8″ (15.9 mm) | 1/4″ (6.4 mm) | Off-road, enduro, mid- and large-displacement road motorcycles |
| 525 | 5/8″ (15.9 mm) | 5/16″ (7.9 mm) | Mid- and large-displacement road motorcycles |
| 530 | 5/8″ (15.9 mm) | 3/8″ (9.5 mm) | Large-displacement, high-power road motorcycles |
Typical use is general guidance; your motorcycle's size is the one specified by its manufacturer.
How do you find the chain size?
- Look at the chain: Most chains have the size and model code printed on the outer plate (e.g. 520 or 525).
- Check the service manual: The chain size and link count are given in the manual.
- Measure it: Measure the pitch between the centers of two adjacent pins and the width between the inner plates with a caliper.
- Confirm in the catalog: The RK catalog lists the correct chain and sprocket codes by make, model and year.
Can you switch to a different size?
The chain, front sprocket and rear sprocket work as a single system. For a size change such as going from 525 to 520, both sprockets must be in the new size, the chain must have strength suited to the motorcycle's power, and the chain must not rub against the guard or slider. Such conversions are usually done for racing and weight saving; for everyday use, stick with the manufacturer's size.
Choosing a chain from RK
The RK catalog lists chains, chain and sprocket kits and front and rear sprockets together with model applications; you can search by chain code, sprocket code or motorcycle model. There are different series in the same size: seal type (standard, O-ring, XW-ring) and strength are chosen according to use. For seal types, see our guide The difference between O-ring, X-ring, XW-ring and standard chains.
Products in this guide
RK chains and sprockets
Chains and heat-treated sprockets made in Japan since 1953; original equipment supplier to many manufacturers including Honda, Yamaha, Suzuki and Kawasaki. 1,119 products and 3,786 model applications in the catalog.
We do not sell directly to end users; you can find the products at our authorised dealers. See our dealers
Frequently asked questions
What does 520 chain mean?
It means a chain with a 5/8″ (15.9 mm) pitch and a 1/4″ (about 6.4 mm) inner width.
What is the difference between 520 and 525 chains?
They have the same pitch; 525 has a larger inner width (5/16″). The sprockets differ accordingly; they are not interchangeable.
Which motorcycles use 428 chain?
Usually small and mid-displacement road and off-road motorcycles. For the exact size, check the manual or the catalog.
Is 530 chain stronger?
Within the same series it is a wider and usually heavier chain; it is used on large, powerful motorcycles. Strength depends not only on size but also on the chain's series.
Is the chain size printed on the chain?
Most chains have the size and series code printed on the outer plate.
Does a chain of a different size fit the sprocket?
No. The chain and both sprockets must be the same size.
