Chain · RK

Rivet or Clip-Type Master Link? When to Use Each

Velomoto teknik ekibiUpdated: 3 min read

Comparison of clip-type and rivet-type master links (illustrative)

Short answer

A master link (connecting link) is the link that joins the two ends of a chain; there are two types: clip-type and rivet-type. On a clip-type link, the outer plate is held on the pins by a spring clip, so it is easy to install and remove. On a rivet-type link, the pin ends are spread with a special tool to fix the plate permanently, creating a solid connection that, like the rest of the chain, does not come apart.

Clip-type links are generally preferred on small-displacement motorcycles and off-road, while rivet-type links are preferred on large-displacement, high-powered road motorcycles. Which link is right for your motorcycle is determined by the owner's manual and the chain manufacturer's instructions.

Velomoto is the official distributor of RK Japan in Turkey.

Comparison

FeatureClip-type linkRivet-type link
ConnectionOuter plate held by a spring clipPin ends spread to fix the plate permanently
Installation and removalEasy; done with simple toolsRequires a riveting tool; not reusable once removed
SecurityDepends on the clip being in place and facing the right wayIf riveted correctly, as strong as the rest of the chain
InspectionClip should be checked at every serviceRivet diameter is measured during installation
Typical useSmall-displacement motorcycles, off-road, racing (chains removed often)Large-displacement, powerful road motorcycles

Which one should you choose?

  • Check the owner's manual: The motorcycle manufacturer specifies the chain and link type. On motorcycles that come from the factory with a riveted or endless (one-piece) chain, use a rivet-type link.
  • Power and use: On high-powered road motorcycles the load on the chain is high, which is why a rivet-type link is preferred.
  • Off-road and racing: In off-road and racing use, where the chain is removed often, a clip-type link is practical; however, the clip should be checked before every ride.
  • Chain series: The link must be the same size and series as the chain. RK master links are made to match the corresponding RK chain series.

Installation tips

  • RK recommends installing every RK chain with a chain tool; tools not designed for the chain can damage it and may void the warranty.
  • On a clip-type link, the closed end of the clip should face the direction of chain travel. For details, see our guide Which way should the master link clip face?
  • On a rivet-type link, the pin ends are spread enough to hold the plate but not so much that they pinch the link; the rivet diameter must be within the range in RK's table. For the steps, see our guide How to rivet a chain.
  • On an O-ring chain's master link, the O-rings must not be forgotten and must be installed in the right place.
RK logo

Products in this guide

RK chains and sprockets

Chains and heat-treated sprockets made in Japan since 1953; original equipment supplier to many manufacturers including Honda, Yamaha, Suzuki and Kawasaki. 1,119 products and 3,786 model applications in the catalog.

We do not sell directly to end users; you can find the products at our authorised dealers. See our dealers

Frequently asked questions

Do RK chains come with a rivet or clip-type link?

RK chains are supplied with a rivet or clip-type link depending on series and size; check the link type in the box and your motorcycle's owner's manual.

Why is a clip-type link not recommended on high-powered motorcycles?

The clip holds the outer plate by spring force alone; high load, vibration or an external impact can knock the clip off. A rivet-type link provides a permanent connection.

Is a clip-type link safe?

A clip-type link that faces the right way, is fully seated and is checked regularly can be used safely on a suitable motorcycle.

Can a rivet-type link be reused?

No. A removed rivet-type link is discarded; if it is to be reinstalled, a new link is used.

What is an endless chain?

It is a chain closed at the factory, with no master link. It cannot be installed without removing the swingarm; replacement chains usually use a rivet-type link.