Brakes · Brenta

Do Brenta sintered brake pads work on high-cc bikes (R25, MT-07, CBR, etc.)?

Velomoto teknik ekibiUpdated: 4 min read

As they heat up, sintered brake pads keep their grip while organic pads lose grip

Short answer

Yes, when the right series is chosen, Brenta sintered brake pads work well on high-cc motorcycles. The Sintered Road series is developed for maxi road motorcycles and the Pro Road series for sporty road use; both are ECE R90 approved. For daily use on light sport bikes like the R25 and naked bikes like the MT-07, Sintered Road is the right fit; for sporty riding and on supersports like the CBR600RR, Pro Road is the right fit. Choose the code from the Brenta catalog by model and year.

Velomoto is the official distributor of Brenta products in Turkey.

What load does a high-cc motorcycle put on the brakes?

The heavier and faster the motorcycle, the more kinetic energy has to be turned into heat to stop it. When speed doubles, this energy quadruples; most of the heat is generated in the brake pads and disc.

Organic brake pads are more prone to losing grip at high temperatures. Sintered brake pads, made by fusing metal powders, are much more heat-resistant and also grip consistently on wet surfaces. That is why sintered brake pads are usually preferred for the front brake on large, fast motorcycles.

Sintered Road or Pro Road? Choosing by model

Motorcycle and useRecommended seriesWhy
Light sport bikes such as the R25, CBR250R / CBR500R, daily useSintered RoadHeat-resistant, long-lasting, does not wear the disc excessively
Upper-mid-range naked bikes such as the MT-07, city and touringSintered RoadEnough heat resistance for the weight and speed
MT-07 and similar, twisty roads and sporty ridingPro RoadSpecial compound for sporty road riding
Supersports such as the CBR600RR / CBR1000RR, roadPro RoadHeat resistance under hard braking from high speed
Track dayCeramic RacingTrack only; not for use in traffic
Brenta Pro Road sintered brake pad
Pro Road
Brenta Ceramic Racing track brake pad
Ceramic Racing (track)

Model names are given as examples. Caliper and brake pad sizes can change between model years of the same bike; find the correct code in the Brenta catalog by make, model and year. For the rear brake pad, also use the code the catalog recommends for your motorcycle.

Checklist before fitting

  • The brake pad code matches your motorcycle's make, model and year in the catalog.
  • Your disc is suitable for sintered brake pads; if you are not sure, check the owner's manual.
  • The disc thickness is above the MIN TH value printed on the disc.
  • There are no deep grooves, bluish discoloration or warping on the disc.
  • The caliper pins and pistons are clean and move freely.
  • The brake fluid is fresh; if it has not been changed in a long time, change it along with the brake pads.
  • The brake pads on both front calipers are replaced together as a set.

Break-in: the first kilometers

New sintered brake pads need to bed in to the disc to reach full grip.

  1. Do not brake hard right after fitting; it is normal for the first stops to feel weak.
  2. For the first 100–200 km, brake gradually and moderately from medium speeds.
  3. Avoid dragging the brakes for long periods and sudden panic stops.
  4. Do not ride on the track or ride aggressively until the break-in is complete.

Brake pads that are not broken in can glaze, which permanently reduces braking power.

Brenta logo

Products in this guide

Brenta brake pads

Organic, sintered and track brake pads made in Italy, ECE R90 approved. The 2026 catalog includes an application table for more than 170 makes and 8,500+ models.

We do not sell directly to end users; you can find the products at our authorised dealers. See our dealers

Frequently asked questions

Are Brenta sintered brake pads suitable for the MT-07?

Yes. Sintered Road suits daily and touring use, and the Pro Road series suits sporty riding. Find the code that matches your motorcycle's year in the catalog.

Sintered or organic for the R25?

For city and calm riding, organic brake pads may be enough. For sporty riding, downhill descents or loaded riding, Sintered Road grips more consistently.

Which Brenta brake pad for a CBR?

Sintered Road suits models such as the CBR250R and CBR500R, and Pro Road suits supersports such as the CBR600RR and CBR1000RR. For the track there is also Ceramic Racing.

Do sintered brake pads wear the disc?

The Sintered Road and Pro Road compounds are developed to give high grip without excessive disc wear. Your disc needs to be suitable for sintered brake pads.

Can I use track brake pads on the road?

No. Ceramic Racing is for the track only. For the road, use ECE R90 approved Sintered Road or Pro Road.

Do Brenta brake pads brake as well as original pads?

The road series are ECE R90 approved; this approval shows that braking performance has been tested against the original part.