Chain · RK

Why Are the Chain Slider and Chain Guard Important?

Velomoto teknik ekibiUpdated: 3 min read

Wear on the chain slider on the swingarm and inspection steps (illustrative)

Short answer

A chain slider is a plastic or rubber part at the front of the swingarm that the chain slides over; it keeps the chain from rubbing against the swingarm. It wears over time; once worn, the chain rubs against the metal swingarm or bolts, makes noise, and both the chain and swingarm are damaged. RK recommends checking the slider and chain guides when cleaning the chain, and inspecting the entire drive system before fitting a new chain.

The chain guard, meanwhile, protects the rider and passenger from the chain and flung-off lube. Riding with the guard removed increases risks such as clothing getting caught in the chain, lube spatter, and a broken chain being flung around.

Velomoto is the official distributor of RK Japan in Turkey.

Parts that protect the chain

PartWhere?Function
Swingarm sliderFront of the swingarm, near the front sprocketKeeps the chain from rubbing against the swingarm
Chain guideIn front of the rear sprocket, mostly on off-road motorcyclesKeeps the chain on the sprocket, prevents jumping
Chain rollerOn the swingarm on some off-road modelsReduces the chain slapping the swingarm
Chain guardAbove the chainProtects the rider, passenger and clothing; reduces lube spatter
Front sprocket coverOn the side of the engineProtects the front sprocket and its surroundings

When should the slider be replaced?

  • If there are deep grooves on the surface the chain rubs against
  • If the slider is thin, torn or pieces have broken off
  • If the bolts underneath or the metal swingarm are showing
  • If there are metal rubbing marks on the chain or swingarm
  • If a new chain is being fitted and the slider is worn

A slider is a cheap part; using a new chain with a worn slider puts both the chain and swingarm at risk.

The damage a worn slider does

  • Heat cracks: According to RK, a chain repeatedly rubbing against a foreign object can cause heat cracks in the plates. A worn slider, exposed bolts or dirt trapped in the guide are common causes.
  • Swingarm damage: The chain gouges the swingarm.
  • Noise: A constant rubbing noise occurs as the chain rubs on the metal surface.
  • Rapid wear: The chain plates and seals are damaged.

A chain that is too loose also wears the slider faster; keeping the slack correct also extends the slider's life.

Riding without a guard

Some riders remove the chain guard for looks or weight savings. The risks:

  • A trouser leg, a shoelace or the passenger's clothing can get caught in the chain.
  • Chain lube spatters onto the rider, the passenger and the rear of the motorcycle.
  • If the chain breaks, the risk of it being flung around increases.
  • Road sand and stones reach the chain more easily.

The guard is a factory part; if it has been removed, refitting it is recommended. For what can happen if the chain breaks, see our guide “What happens if the chain breaks?” (Group 5).

RK logo

Products in this guide

RK chains and sprockets

Chains and heat-treated sprockets made in Japan since 1953; original equipment supplier to many manufacturers including Honda, Yamaha, Suzuki and Kawasaki. 1,119 products and 3,786 model applications in the catalog.

We do not sell directly to end users; you can find the products at our authorised dealers. See our dealers

Frequently asked questions

What is a chain slider?

A plastic or rubber part that keeps the chain from rubbing against the swingarm.

When should a chain slider be replaced?

When deep grooves form, when it gets thin and torn, or when the metal underneath shows; always check it when fitting a new chain.

Does a worn slider damage the chain?

Yes. The chain rubs against metal and the plates and seals wear; according to RK, it can cause heat cracks.

Can you ride without a chain guard?

Not recommended. The risk of clothing getting caught in the chain, lube spatter and a broken chain being flung around increases.

Why does the slider wear quickly?

A chain that is too loose, dirt and sand, and a dry chain wear the slider quickly.

There is a rubbing noise from the chain; could it be the slider?

Yes. Check the slider, the guard and the axle alignment.