Chain · RK

Can Kerosene, Diesel, Gasoline or Thinner Be Used to Clean a Chain?

Velomoto teknik ekibiUpdated: 3 min read

List of products to use and not to use for chain cleaning (illustrative)

Short answer

No. RK recommends that O-ring chains not be cleaned with kerosene, mineral spirits (white spirit), diesel, brake (pad) cleaner, engine oil or abrasive chemicals. Instead, a mineral-based, O-ring-safe chain cleaner is applied with a cloth. Volatile solvents such as gasoline and thinner can also damage rubber seals and are flammable; they should not be used.

These products can degrade the seals and let the factory grease inside the chain escape; the chain then wears, stretches and rusts.

Velomoto is the official distributor of RK Japan in Turkey.

Which products can be used and which cannot?

ProductCan it be used?Explanation
O-ring-safe chain cleanerYesThe method RK recommends; applied with a cloth
KeroseneNoRK recommends not using it
DieselNoRK recommends not using it
Brake (pad) cleanerNoRK recommends not using it; it is a strong solvent
Mineral spirits (white spirit)NoRK recommends not using it on O-ring chains
Gasoline, thinnerNoVolatile solvents can damage the seals; fire risk
Engine oilNoRK recommends not using it for cleaning
Abrasive (caustic) chemicalsNoDamage the seals and the metal
Wire or stiff-bristled brushNoTears the seals

Kerosene or brake cleaner spray?

Neither is recommended. Kerosene is an old habit and even appears in some old service manuals; however, RK recommends not using kerosene on O-ring chains. Brake (pad) cleaner is a strong solvent that evaporates quickly; it can dry out the seals and is on RK's list of products not to use. Brake cleaner spray can also splash from the chain onto the brake disc.

Water-based cleaners

RK recommends a mineral-based, O-ring-safe cleaner. If you are going to use a water-based cleaner, choose a non-abrasive product whose manufacturer clearly states O-ring chain compatibility; then dry the chain thoroughly and lubricate it right away. Water left on it quickly causes rust.

Care when washing

  • When washing the motorcycle, do not aim high-pressure water directly at the chain.
  • After washing, dry the chain with a short ride and lubricate it.

For the correct cleaning and lubrication steps, see our guide How do you clean and lubricate a motorcycle chain?

RK logo

Products in this guide

RK chains and sprockets

Chains and heat-treated sprockets made in Japan since 1953; original equipment supplier to many manufacturers including Honda, Yamaha, Suzuki and Kawasaki. 1,119 products and 3,786 model applications in the catalog.

We do not sell directly to end users; you can find the products at our authorised dealers. See our dealers

Frequently asked questions

Can a chain be cleaned with kerosene?

Not recommended on O-ring chains. RK recommends not using kerosene.

Can a chain be cleaned with diesel?

No. RK also lists diesel among the products that should not be used.

Can brake cleaner spray be used on a chain?

No. It is a strong solvent and is on RK's list; it can also get onto the brake disc.

Can a chain be cleaned with gasoline or thinner?

No. Volatile solvents can damage the seals and carry a fire risk.

Is kerosene OK on a non-sealed chain?

RK does not recommend kerosene, diesel or brake cleaner on non-sealed chains either; the same mineral-based cleaner is used.

Can a water-based cleaner be used?

It can be used if the manufacturer says it is O-ring safe and it is not abrasive; afterwards the chain must be dried and lubricated right away.